NT UltiMate 1500 Series Crossfeed Veneer Splicer

Model： NT UltiMate 1500

Veneer Strip Length： 450 - 1500 mm (17.71'' - 59.05'')

Veneer Strip Thickness： 0.25 - 1.5 mm (  0.009'' - 0.059'')

Veneer Strip Width： min. 75 mm (85 mm for 1st strip) (2.95'') (3.22'')

Production Speed： up to 15 - 20 cycles/min.   

Electric Power： approx. 16 kw

Compressed Air : 3/8 Line @ 90 Psi

Dimensions (L x W x H)： 2950 x 1500 x 1800 mm (116'' x 59'' x 71'')

Net Weight： approx. 3500 kg (7716 Lbs.)

  The UltiMate crossfeed splicing machine is designed for glue-spliced joint for long and panel-sized veneer faces.  Veneer bundles can be well-cut straight with double knife guillotines and then pre-glued on the edges as preparation. The pre-glued veneer strips are fed into the machine manually with feeding stoppers for fast and easy operation. The efficient production output of the crossfeed splicing machines is a great deal faster than the longitudinal splicing machines, especially beneficial for long veneers. We also supply Automatic Stacking System with Trimming as optional equipment for a big step towards the automated production. Together with our Double Knife Veneer Guillotine, CutMate D series, Double Sided Veneer Glue Applicator, GlueMate 700, and Veneer Fanning Machine, FanningMate, a full set of veneer splicing line is completed.

Features

• veneer aligned after clipping
• JAPAN YUKEN hydraulic system
• JAPAN MITSUBISHI PLC control system
• self-diagnosis system for fast maintenance
• infeed guides for veneer jointing alignment
• air cleaning system for photoelectric sensors
• program setting for different species of veneers
• GERMANY FESTO pneumatic system
• safety guard of light curtain with European safety standards
• fix-length (cut-to-size) and endless (fix-jointed) splicing modes offered
• pre-feeding stopper system to avoid mismatching in the beginning of feeding stage
• hydraulic driven clipper for the pre-selected width of veneer faces

UltiMate series

• “clear-and-easy” operation control panel with user-friendly PLC based interface touch screen veneers with the thinness as low as 0.2 mm spliced (certain species of veneers)
• independent cylinders for crossbeam pressure for thin veneers splicing even possible with extremely thin veneers
• remote monitoring maintenance system for faster access from the manufacturer in case of machine breakdown
• In case of machine breakdown, our service personnel can check customers’ PLC program via the internet so as to solve the problem in time