NT S5230 Five Spindle Moulder

NT S5230 Five Spindle Moulder

NT-S5230-Five-Spindle-Moulder_4563A.jpg
NT-S5230-Five-Spindle-Moulder_4563A.jpg
NT-S5230-Five-Spindle-Moulder_4563B.jpg
NT-S5230-Five-Spindle-Moulder_4563C.jpg
NT-S5230-Five-Spindle-Moulder_4563D.jpg
NT-S5230-Five-Spindle-Moulder_4563E.jpg
NT-S5230-Five-Spindle-Moulder_4563F.jpg
NT-S5230-Five-Spindle-Moulder_4563G.jpg
NT-S5230-Five-Spindle-Moulder_4563H.jpg
NT-S5230-Five-Spindle-Moulder_4563I.jpg
NT-S5230-Five-Spindle-Moulder_4563J.jpg
NT-S5230-Five-Spindle-Moulder_4563K.jpg
NT-S5230-Five-Spindle-Moulder_4563L.jpg
NT-S5230-Five-Spindle-Moulder_4563M.jpg
NT-S5230-Five-Spindle-Moulder_4563N.jpg
NT-S5230-Five-Spindle-Moulder_4563O.jpg
NT-S5230-Five-Spindle-Moulder_4563P.jpg
NT-S5230-Five-Spindle-Moulder_4563Q.jpg
NT-S5230-Five-Spindle-Moulder_4563R.jpg
NT-S5230-Five-Spindle-Moulder_4563S.jpg
NT-S5230-Five-Spindle-Moulder_4563T.jpg

 

 

SPINDLE ARRANGEMENT

• 1st - Bottom horizontal: 7.5HP

• 2nd & 3rd Left/Right vertical: 15HP

• 4th - Top horizontal: 7.5HP

• 5th - Bottom horizontal: 7.5HP

• Spindle speed: 6000RPM

• Spindle diameter: 1-13/16"

 

FEED SYSTEM

• Feeding motor: 3HP

• Elevation motor: 1/3HP

• Feeding speed: 20-75 FPM

 

PRODUCT DIMENSIONS

• Width: 10mm - 230mm (3/8" - 9")

• Thickness: 7mm - 125mm (1/4" - 5")

 

FEATURES:

• Infeed table length: 51"

• Hard chrome plated table

• Incorporated bed roller

• (3) 4 Wing 5" x 9", corrugated knife stock moulder heads for 1-13/16" (Included)

• (2) 4 Wing 5" x 4", corrugated knife stock moulder heads for 1-13/16" (Included)

• Net Weight: 5,550 lbs.

• Gross Weight: 5,850 lbs.

• Machine Dimensions: (L) 102" x (W) 53" x (H) 68"

• Packing Dimensions: (L) 92" x (W) 56" x (H) 78"

• Warranty is one year parts

• All machines tested stateside at Northtech prior to shipment providing trouble free start up.



  • Machine Hp. = 41 Hp.
  • Voltage/ Freq. = 230 Volt 60Hz
  • Phase = 3 Phase
  • Amp Requirement = 100 Amps
  • Spindle Arrang. = Bottom R L Top Bottom
  • 1st Spindle = 7.5HP, 6,000RPM, 1-13/16"
  • 2nd Spindle = 15HP Shared 6,000RPM, 1-13/16"
  • 3rd Spindle = 15HP Shared 6,000RPM, 1-13/16"
  • 4th Spindle = 7.5HP, 6,000RPM, 1-13/16"
  • 5th Spindle = 7.5HP, 6,000RPM, 1-13/16"
  • Spindle Diam. = 1-13/16''
  • Spindle RPM = 6000 Rpm
  • Under Nut Cap. = 10-1/4'' Horizontal 6'' Vertic
  • Feed Hp. = 3 Hp.
  • Feed System = Knurled / Urethane Rollers
  • Drive System = Cardan Shaft Drive System
  • Feed Speed = 20- 75 Fpm
  • Variable Speed = Variable Speed Pulley
  • Reverse Feed = Reversible Feed
  • Elevation Hp. = 1/2 Hp.
  • Elevation Style = Up/Down Switch
  • Elevation Sys. = Jack Screw / Gib System
  • Total Hp. = 41 Hp.
  • Electronics = CE Approved Components
  • Dual Voltage = 230/460 Volt
  • Control Voltage = 110 Volt
  • Assisted Start = Wye Delta 15 Hp Heads
  • Pass-Line = 34-3/4''
  • Min. Length = 22''
  • Min. Width = 3/8''
  • Max. Width = 9''
  • Min. Thickness = 1/4''
  • Max. Thickness = 5''
  • Dust Collection = (5) 5'' @ 3405 CFM Total
  • Powered Rollers = (5) Top, (1) Bottom
  • Idle Rollers = (1) Idle Roller
  • Hold Down Style = Pressure Shoes/Rubber Rollers
  • Recommended CFM = 3/8'' Supply Line @ 90 Psi
  • Emergency Stop = (2) Push Button
  • Guarding = Full Enclosure
  • Grease Manifold = Remote Grease Manifold
  • Oiler = Manual Oiler
  • Fence Type = Adjustable
  • Fence Dims. = 1'' x 40-1/2''
  • Frame Const. = Cast/Steel Construction
  • Table Const. = Cast Iron
  • Outfeed Table = 11-1/4'' x 11-1/4''
  • Chrome Bed = .004'' Chrome Plated Bed
  • Noise Bed Fing. = 1st Head
  • Decible Rating = 83 dB
  • Net Weight = 5550 Lbs.
  • Gross Weight = 5850 Lbs.
  • Machine Dims. = 105'' x 53'' x 68''
  • Packaging Dims = 92'' x 56'' x 76''


Item ID: 4563

Category: Moulders

Our Price: Call for Price and Availability
 

Weight 5550.00 lbs
SKU 4563
: *
: *
: *
Type the characters you see in the picture:
Captcha

*
NT ES636SE-332 Edge Sander

NT ES636SE-332 Edge Sander

Call for Price and Availability

 
NT CS14L-734 Up Cut Saw

NT CS14L-734 Up Cut Saw

Call for Price and Availability

 
NT CFS-100A Automatic Crayon Mark & Defect Saw

NT CFS-100A Automatic Crayon Mark & Defect Saw

Call for Price and Availability