NT PHR-400Z-4434

NT PHR-400Z-4434

NT-PHR-400Z-4434_1179A.jpg
NT-PHR-400Z-4434_1179A.jpg
NT-PHR-400Z-4434_1179B.jpg
NT-PHR-400Z-4434_1179C.jpg
NT-PHR-400Z-4434_1179D.jpg
NT-PHR-400Z-4434_1179E.jpg
NT-PHR-400Z-4434_1179F.jpg
NT-PHR-400Z-4434_1179G.jpg
NT-PHR-400Z-4434_1179H.jpg
NT-PHR-400Z-4434_1179I.jpg
NT-PHR-400Z-4434_1179J.jpg
NT-PHR-400Z-4434_1179K.jpg
NT-PHR-400Z-4434_1179L.jpg
NT-PHR-400Z-4434_1179M.jpg
NT-PHR-400Z-4434_1179N.jpg
NT-PHR-400Z-4434_1179O.jpg
NT-PHR-400Z-4434_1179P.jpg
NT-PHR-400Z-4434_1179Q.jpg

NT PHR-400Z-4434 16" Horizontal Band Resaw Precision Chain Feed Series

 

• Maximum cutting capacity: W 16" x H 10.75"

• Minimum thickness: 2mm (.07")

• Saw wheel diameter: W 2" x H 36"

• Saw blade length: 6060mm (238 ½")

• Saw blade width: 75mm (3"), (2" is optional)

• Steel chain conveyor belt: 400mm (16")

• Conveyor height (from floor): 926mm (36 ½")

• Feed speed: 5-55 FPM

• Feed inverter motor: 3HP with 5HP variable frequency drive

• Saw wheel motor: 40HP with 50HP variable frequency drive

• Blade lift motor: ¾ HP on precision ball screw lifting system

• 1HP pump for hydraulic blade tensioning system

• Dust ports: (2) 4"

• Dust collection requirements: 450 CFM @ points of extraction

• Touch screen control panel

• Precision blade guides from tungsten carbide

• Power return conveyor (Optional)

• All machines are tested stateside prior to shipment providing trouble free start up.



  • Main Motor Hp. = 40 hp.
  • Voltage/ Freq. = 460 Volt 60Hz
  • Phase = 3 Phase
  • Amp Requirement = 56.67 Amps
  • Feed Hp. = 3 Hp.
  • Feed System = 16'' Chain Feed
  • Drive System = Chain Drive
  • Feed Speed = 5 - 55 FPM
  • Variable Speed = Inverter Controlled
  • Elevation Hp. = 3/4 Hp.
  • Elevation Style = Auto Touch Screen Control
  • Elevation Sys. = (2) Post Jack Screw
  • Total Hp. = 44.5 Hp.
  • Electronics = CE Approved Components
  • Dual Voltage = 230/460 Volt
  • Control Voltage = 230 Volt
  • Programmable = Feed Speed / Blade Speed
  • Touch Screen = 7'' Digital Touch Screen
  • Operator Panel = Mobile Cabinet
  • Min. Length = 14''
  • Min. Width = 2"
  • Max. Width = 16''
  • Min. Thickness = .07''
  • Max. Thickness = 10-3/4''
  • Blade Size = 238-1/2''
  • Tooth Spacing = 1''
  • Blade Kerf = .086 In.
  • Blade Speed = 3850 - 7150 FPM
  • Tracking Style = Manual Adjustment
  • Tension Style = Hydraulic Tension
  • Vertical Travel = .07'' - 10-3/4''
  • Dust Collection = (2) 4'' @ 900 CFM
  • Dust Port Out = 2 4'' Top
  • Conveyor = 16'' Chain Conveyor
  • Chain Adj. = Manual
  • Hold Down Style = 3 Front 2 Rear Pneumatic
  • FLR Included = Filter, Lubricator, Regulater
  • Recommended CFM = 872 Total CFM
  • Emergency Stop = Push Button
  • Rear E Stop = Push Button
  • Guarding = Full Cabinet Enclosure
  • Oiler = Auto Oiler
  • Blade Guide = Precision Tungsten Carbide
  • Wheel Dims. = 2'' x 36''
  • Wheel Cnstr. = Steel Construction
  • Frame Const. = 1/4'' Steel Construction
  • Worktable Dims. = 16'' x 85-1/2''
  • Decible Rating = 76 dB
  • Net Weight = 4321 Lbs.
  • Gross Weight = 4762 Lbs.
  • Machine Dims. = 107'' x 87'' x 91''
  • Packaging Dims = 109'' x 90'' x 100''


Item ID: 1179

Category: Band Saws, Horizontal

Our Price: Call for Price and Availability
 

Weight 4762.00 lbs
SKU 1179
: *
: *
: *
Type the characters you see in the picture:
Captcha

*
NT N6230 Six Spindle Moulder

NT N6230 Six Spindle Moulder

Call for Price and Availability

 
NT CutMate 700C Cross Cut Veneer Clipper

NT CutMate 700C Cross Cut Veneer Clipper

Call for Price and Availability

 
NT CS14R-734 Up Cut Saw

NT CS14R-734 Up Cut Saw

Call for Price and Availability