NT N6230 Six Spindle Moulder

NT N6230 Six Spindle Moulder

NT-N6230-Six-Spindle-Moulder_1322A.jpg
NT-N6230-Six-Spindle-Moulder_1322A.jpg
NT-N6230-Six-Spindle-Moulder_1322B.jpg
NT-N6230-Six-Spindle-Moulder_1322C.jpg
NT-N6230-Six-Spindle-Moulder_1322D.jpg
NT-N6230-Six-Spindle-Moulder_1322E.jpg
NT-N6230-Six-Spindle-Moulder_1322F.jpg
NT-N6230-Six-Spindle-Moulder_1322G.jpg
NT-N6230-Six-Spindle-Moulder_1322H.jpg
NT-N6230-Six-Spindle-Moulder_1322I.jpg
NT-N6230-Six-Spindle-Moulder_1322J.jpg
NT-N6230-Six-Spindle-Moulder_1322K.jpg
NT-N6230-Six-Spindle-Moulder_1322L.jpg
NT-N6230-Six-Spindle-Moulder_1322M.jpg
NT-N6230-Six-Spindle-Moulder_1322N.jpg

NT N6230 Six Spindle Moulder

 

SPINDLE ARRANGEMENT

 

• 1st: Bottom horizontal: 15HP, 6,000 RPM, 40mm spindle

• 2nd: Right vertical: 10HP, 6,000 RPM, 40mm spindle

• 3rd: Left vertical: 10HP, 6,000 RPM, 40mm spindle

• 4th: Top horizontal: 15HP, 6,000 RPM, 40mm spindle

• 5th: Top horizontal: 15HP, 6,000 RPM, 40mm spindle

• 6th: Bottom horizontal: 15HP, 6,000 RPM, 40mm spindle

 

FEED SYSTEM

 

• Feeding motor: 7-1/2 HP with inverter

• Elevation motor: 1/2 HP

• Feeding speed: 20 - 120 FPM

 

PRODUCT DIMENSIONS

 

• Width: 10mm - 230mm (3/8" - 9-1/2")

• Thickness: 8mm - 170mm (5/16" - 6-1/2")

• Minimum length: 300mm (12")

 

FEATURES

 

• Infeed table length: 1300mm (51")

• Table is hard chrome plated

• (3) Powered bed rollers

• (1) Auxiliary short stock roller

• (1 set) Moulder heads Horizontal: (4) 5" x 9"; 4 wing, 40mm heads Vertical: (2) 5" x 4"; 4 wing, 40mm heads

• Dust collection: (6) 125mm (5") dust ports requiring 681 CFM @ each point of extraction

• Net weight: 9,039 lbs.

• Gross weight: 10,362 lbs.

• Machine dimensions: (L) 150" x (W) 83" x (H) 84"

• Packing dimensions: (L) 168" x (W) 76" x (H) 71"

• (1) Tool box

• Warranty is one year parts

• All machines are tested at factory prior to shipment providing trouble free start up.



  • Reverse Motor = Feed Motor
  • Machine Hp. = 88 Hp.
  • Voltage/ Freq. = 230 Volt 60Hz
  • Phase = 3 Phase
  • Amp Requirement = 209 Amps
  • Spindle Arrang. = Bottom R L Top Top Bottom
  • 1st Spindle = 15HP, 6,000RPM, 40mm spindle
  • 2nd Spindle = 10HP, 6,000RPM, 40mm spindle
  • 3rd Spindle = 10HP, 6,000RPM, 40mm spindle
  • 4th Spindle = 15HP, 6,000RPM, 40mm spindle
  • 5th Spindle = 15HP, 6,000RPM, 40mm spindle
  • 6th Spindle = 15HP, 6,000RPM, 40mm spindle
  • Spindle Diam. = 40 mm
  • Spindle RPM = 6000 Rpm
  • Under Nut Cap. = Horiz. 9-7/8'' Vert. 7''
  • Feed Hp. = 7.5 Hp.
  • Feed System = Synchronized gear box feed sys
  • Drive System = Inverter controlled 7.5HP feed
  • Feed Speed = 20 - 120 FPM
  • Variable Speed = Inverter Controlled
  • Elevation Hp. = 1/2 Hp.
  • Elevation Style = Up/Down Switch
  • Elevation Sys. = Jack Screw / Gib System
  • Total Hp. = 88 Hp.
  • Electronics = UL Approved Components
  • Dual Voltage = 230/460 Volt
  • Control Voltage = 220V Control Voltage
  • Assisted Start = Wye Delta 15 Hp Heads
  • Pass-Line = 35-1/2''
  • Min. Length = 12''
  • Min. Width = 3/8''
  • Max. Width = 9-1/2''
  • Min. Thickness = 5/16''
  • Max. Thickness = 6-1/2''
  • Roller Type = Steel / Rubber
  • Dust Collection = (6) 5'' @ 5886 CFM
  • Digital Display = Feed
  • Powered Rollers = 9 Top 3 Bottom Powered Rollers
  • Pressure Shoes = (2) 7-1/8'' x 8-3/4''
  • Hold Down Style = Pressure Shoes/Rubber Rollers
  • Emergency Stop = (2) Push Button
  • Guarding = Full Cabinet Enclosure
  • Grease Manifold = Remote Grease Manifold
  • Oiler = Auto Oiler
  • Fence Type = Adjustable Fence
  • Fence Dims. = 1'' x 53-1/4''
  • Brake System = Air Brakes On Motors
  • Frame Const. = Cast/Steel Construction
  • Worktable Dims. = 10-7/8'' x 136''
  • Chrome Bed = .004'' Chrome Plated Bed
  • Noise Bed Fing. = Noise Reduction
  • Measure Meth. = Siko Counter
  • Decible Rating = 76 dB
  • Net Weight = 9039 Lbs.
  • Gross Weight = 10800 Lbs.
  • Machine Dims. = 158'' x 75'' x 71''
  • Packaging Dims = 163'' x 83'' x 84''


Item ID: 1322

Category: Moulders

Our Price: Call for Price and Availability
 

Weight 10362.00 lbs
SKU 1322
: *
: *
: *
Type the characters you see in the picture:
Captcha

*
NT CutMate 2800 Series Single Knife Veneer Guillotine

NT CutMate 2800 Series Single Knife Veneer Guillotine

Call for Price and Availability

 
NT 101-73 Spindle Shaper

NT 101-73 Spindle Shaper

Call for Price and Availability

 
NT MRS-12N-4032 Heavy Duty Gang Rip Saw

NT MRS-12N-4032 Heavy Duty Gang Rip Saw

Call for Price and Availability