NT N6230-3 Six Spindle Moulder

NT N6230-3 Six Spindle Moulder

NT-N6230-3-Six-Spindle-Moulder_4562A.jpg
NT-N6230-3-Six-Spindle-Moulder_4562A.jpg
NT-N6230-3-Six-Spindle-Moulder_4562B.jpg
NT-N6230-3-Six-Spindle-Moulder_4562C.jpg
NT-N6230-3-Six-Spindle-Moulder_4562D.jpg
NT-N6230-3-Six-Spindle-Moulder_4562E.jpg
NT-N6230-3-Six-Spindle-Moulder_4562F.jpg
NT-N6230-3-Six-Spindle-Moulder_4562G.jpg
NT-N6230-3-Six-Spindle-Moulder_4562H.jpg
NT-N6230-3-Six-Spindle-Moulder_4562I.jpg
NT-N6230-3-Six-Spindle-Moulder_4562J.jpg
NT-N6230-3-Six-Spindle-Moulder_4562K.jpg
NT-N6230-3-Six-Spindle-Moulder_4562L.jpg
NT-N6230-3-Six-Spindle-Moulder_4562M.jpg
NT-N6230-3-Six-Spindle-Moulder_4562N.jpg
NT-N6230-3-Six-Spindle-Moulder_4562O.jpg
NT-N6230-3-Six-Spindle-Moulder_4562P.jpg
NT-N6230-3-Six-Spindle-Moulder_4562Q.jpg
NT-N6230-3-Six-Spindle-Moulder_4562R.jpg
NT-N6230-3-Six-Spindle-Moulder_4562S.jpg

NT N6230-3 Six Spindle Moulder

 

SPINDLE ARRANGEMENT

• 1st: Bottom horizontal: 10HP, 6,000RPM, 1-13/16" spindle

• 2nd: Right vertical: 10HP, 6,000RPM, 1-13/16" spindle

• 3rd: Left vertical: 10HP, 6,000RPM, 1-13/16" spindle

• 4th: Top horizontal: 15HP, 6,000RPM, 1-13/16" spindle

• 5th: Top horizontal: 15HP, 6,000RPM, 1-13/16" spindle

• 6th: Bottom horizontal: 15HP, 6,000RPM, 1-13/16" spindle

FEED SYSTEM

• Feeding motor: 7-1/2 HP with inverter

• Elevation motor: 1/2 HP

• Feeding speed: 20 - 15FPM

PRODUCT DIMENSIONS USING FULL TOOL RANGE

• Width: 10mm - 230mm (3/8" - 9")

• Thickness: 7mm - 160mm (3/8" - 7")

• Minimum length: 300mm (12")

FEATURES

• (3) Spindle positioning through individual digital controllers

• Infeed table length: 1300mm (51")

• Table is hard chrome plated

• (3) Powered bed rollers

• (1 set) Moulder heads (Included)

   Horizontal: (4) 5" x 9"; 4 wing, 1-13/16" heads

Vertical: (2) 5" x 4"; 4 wing, 1-13/16" heads

• Dust collection: (6) 125mm (5") dust ports requiring

   681 CFM @ each point of extraction

• Net weight: 9,039 lbs.

• Gross weight: 10,362 lbs.

• Machine dimensions: (L) 158" x (W) 79" x (H) 74"

• Packing dimensions: (L) 163" x (W) 85" x (H) 85"

• (1) Tool box

• Warranty is one year parts

• All machines are tested at factory prior to shipment providing trouble free start up.



  • Machine Hp. = 88 Hp.
  • Voltage/ Freq. = 230 Volt 60Hz
  • Phase = 3 Phase
  • Amp Requirement = 250 Amps
  • Spindle Arrang. = Bottom R L Top Top Bottom
  • 1st Spindle = 10HP, 6,000RPM, 1-13/16"
  • 2nd Spindle = 10HP, 6,000RPM, 1-13/16"
  • 3rd Spindle = 10HP, 6,000RPM, 1-13/16"
  • 4th Spindle = 15HP, 6,000 RPM, 1-13/16''
  • 5th Spindle = 15HP, 6,000 RPM, 1-13/16''
  • 6th Spindle = 15HP, 6,000RPM, 40mm spindle
  • Spindle Diam. = 1-13/16''
  • Spindle RPM = 6000 Rpm
  • Under Nut Cap. = 9-1/2'' Horizontal 6'' Vertica
  • Feed Hp. = 7.5 Hp.
  • Feed System = Knurled / Urethane Rollers
  • Drive System = Cardan Shaft Drive System
  • Feed Speed = 20 - 115 FPM
  • Variable Speed = Inverter Controlled
  • Reverse Feed = Reversible Feed
  • Elevation Hp. = 1/2 Hp.
  • Elevation Style = Up/Down Switch
  • Elevation Sys. = Jack Screw / Gib System
  • Total Hp. = 83 Hp.
  • Electronics = CE Approved Components
  • Dual Voltage = 230/460 Volt
  • Control Voltage = 110 Volt
  • Assisted Start = Wye Delta 15 Hp Heads
  • Programmable = Spindle 3, 4, 5
  • Pass-Line = 35-1/2''
  • Min. Length = 12''
  • Min. Width = 3/8''
  • Max. Width = 9''
  • Min. Thickness = 3/8''
  • Max. Thickness = 7''
  • Dust Collection = (6) 5'' @ 5886 CFM
  • Digital Display = Spindles 3, 4, 5
  • Powered Rollers = 9 Top 3 Bottom Powered Rollers
  • Hold Down Style = Pressure Shoes/Rubber Rollers
  • Recommended CFM = 3/8'' Supply Line @ 90 Psi
  • Emergency Stop = (2) Push Button
  • Guarding = Full Enclosure
  • Grease Manifold = Remote Grease Manifold
  • Oiler = Auto Oiler
  • Low Oil Warning = Low Oil Shut-off
  • Fence Type = Adjustable Fence
  • Fence Dims. = 1'' x 55-1/2''
  • Frame Const. = Cast/Steel Construction
  • Noise Bed Fing. = 1st Head
  • Decible Rating = 69 dB
  • Net Weight = 9039 Lbs.
  • Gross Weight = 10362 Lbs.
  • Machine Dims. = 158'' x 79'' x 74''
  • Packaging Dims = 163'' x 85'' x 85''


Item ID: 4562

Category: Moulders

Our Price: Call for Price and Availability
 

Weight 10362.00 lbs
SKU 4562
: *
: *
: *
Type the characters you see in the picture:
Captcha

*
NT 1300RC-MT Wide Belt Sander

NT 1300RC-MT Wide Belt Sander

Call for Price and Availability

 
NT CS20R-1034 Up Cut Saw

NT CS20R-1034 Up Cut Saw

Call for Price and Availability

 
NT CS20L-1034 Up Cut Saw

NT CS20L-1034 Up Cut Saw

Call for Price and Availability