NT N4230 4 Sided Moulder

NT N4230 4 Sided Moulder

NT-N4230-4-Sided-Moulder_4410A.jpg
NT-N4230-4-Sided-Moulder_4410A.jpg
NT-N4230-4-Sided-Moulder_4410B.jpg
NT-N4230-4-Sided-Moulder_4410C.jpg
NT-N4230-4-Sided-Moulder_4410D.jpg
NT-N4230-4-Sided-Moulder_4410E.jpg
NT-N4230-4-Sided-Moulder_4410F.jpg
NT-N4230-4-Sided-Moulder_4410G.jpg
NT-N4230-4-Sided-Moulder_4410H.jpg
NT-N4230-4-Sided-Moulder_4410I.jpg
NT-N4230-4-Sided-Moulder_4410J.jpg
NT-N4230-4-Sided-Moulder_4410K.jpg
NT-N4230-4-Sided-Moulder_4410L.jpg
NT-N4230-4-Sided-Moulder_4410M.jpg
NT-N4230-4-Sided-Moulder_4410N.jpg
NT-N4230-4-Sided-Moulder_4410O.jpg
NT-N4230-4-Sided-Moulder_4410P.jpg
NT-N4230-4-Sided-Moulder_4410Q.jpg
NT-N4230-4-Sided-Moulder_4410R.jpg
NT-N4230-4-Sided-Moulder_4410S.jpg

NT N4230 Four Spindle Moulder

 

SPINDLE ARRANGEMENT

 

1st: Bottom horizontal: 10 HP, 6,000 RPM, 1-13/16" spindle

2nd: Right vertical: 7.5 HP, 6,000 RPM, 1-13/16" spindle

3rd: Left vertical: 7.5 HP, 6,000 RPM, 1-13/16" spindle

4th: Top horizontal: 10 HP, 6,000 RPM, 1-13/16" spindle

 

FEED SYSTEM

 

Feeding motor: 7.5 HP with inverter

Elevation motor: 1/2 HP

Feeding speed: 30 - 120 FPM

 

PRODUCT DIMENSIONS

 

Width: 10mm - 230mm (3/8" - 9-1/2")

Thickness: 8mm - 170mm (5/16" - 6-1/2")

Minimum length: 27" Single piece feed

 

FEATURES

 

Infeed table length: 60"

Table is hard chrome plated

(2) Powered bed rollers

(1 set) Moulder heads (Included)

Horizontal: (2) 5" x 9"; 4 wing, 1-13/16" heads

Vertical: (2) 5" x 4"; 4 wing, 1-13/16" heads

Dust collection: (5) 125mm (5") dust ports requiring

681 CFM @ each point of extraction

Gross weight: 7,380 lbs.

Gross weight: 7,900 lbs.

Machine dimensions: (L) 120" x (W) 77" x (H) 74"

Packing dimensions: (L) 140" x (W) 82" x (H) 93"

(1) Tool box

Warranty is one year parts

All machines are tested at factory prior to shipment providing trouble free start up.



  • Reverse Motor = Feed Motor
  • Voltage/ Freq. = 208 Volt 60Hz
  • Phase = 3 Phase
  • Amp Requirement = 160 Amps
  • Configuration = 4 Head
  • Spindle Arrang. = Bottom Right Left Top
  • 1st Spindle = 10HP, 6,000RPM, 1-13/16"
  • 2nd Spindle = 7.5HP, 6,000RPM, 1-13/16"
  • 3rd Spindle = 7.5HP, 6,000RPM, 1-13/16"
  • 4th Spindle = 10HP, 6,000RPM, 1-13/16"
  • Spindle Diam. = 1-13/16''
  • Spindle RPM = 6000 Rpm
  • Under Nut Cap. = Horiz. 9-7/8'' Vert. 7''
  • Feed Hp. = 7.5 Hp.
  • Feed System = Synchronized gear box feed sys
  • Drive System = Inverter controlled 7.5HP feed
  • Feed Speed = 30 - 120 FPM
  • Variable Speed = Inverter Controlled
  • Reverse Feed = Yes
  • Elevation Hp. = 1/2 Hp.
  • Elevation Style = Up/Down Switch
  • Elevation Sys. = Jack Screw / Gib System
  • Total Hp. = 43 Hp.
  • Electronics = UL Approved Components
  • Dual Voltage = 208/300 Volt
  • Control Voltage = 110 Volt
  • Pass-Line = 35''
  • Min. Length = 27'' Single Piece
  • Min. Width = 3/8''
  • Max. Width = 9-1/2''
  • Min. Thickness = 3/8''
  • Max. Thickness = 6-1/2''
  • Roller Type = Steel / Rubber
  • Dust Collection = (5) 5'' @ 3405 CFM Total
  • Digital Display = Feed
  • Powered Rollers = (12) 2'' x 5-5/8''
  • Idle Rollers = (2) 1'' x 5-5/8''
  • Pressure Shoes = (1) 7-1/8'' X 8-3/4''
  • Hold Down Style = Pressure Shoes/Rubber Rollers
  • Emergency Stop = (2) Push Button
  • Guarding = Full Cabinet Enclosure
  • Grease Manifold = Remote Grease Manifold
  • Oiler = Auto Oiler
  • Fence Type = Adjustable Fence
  • Fence Dims. = 1'' x 60''
  • Frame Const. = Cast/Steel Construction
  • Worktable Dims. = 10-3/4'' x 117''
  • Chrome Bed = .004'' Chrome Plated Bed
  • Noise Bed Fing. = Noise Reduction
  • Measure Meth. = Siko Counter
  • Decible Rating = 64 dB
  • Net Weight = 7380 Lbs.
  • Gross Weight = 7880 Lbs.
  • Machine Dims. = 120'' x 82'' x 92-1/2''
  • Packaging Dims = 140'' x 82'' x 92-1/2''


Item ID: 4410

Category: Moulders

Our Price: Call for Price and Availability
 

Weight 7900.00 lbs
SKU 4410
: *
: *
: *
Type the characters you see in the picture:
Captcha

*
NT N6230 Six Spindle Moulder

NT N6230 Six Spindle Moulder

Call for Price and Availability

 
NT CutMate 700C Cross Cut Veneer Clipper

NT CutMate 700C Cross Cut Veneer Clipper

Call for Price and Availability

 
NT CS14R-734 Up Cut Saw

NT CS14R-734 Up Cut Saw

Call for Price and Availability