NT MRS-14N-5034 Gang Rip Saw

NT MRS-14N-5034 Gang Rip Saw

NT-MRS-14N-5034-Gang-Rip-Saw_3510A.jpg
NT-MRS-14N-5034-Gang-Rip-Saw_3510A.jpg
NT-MRS-14N-5034-Gang-Rip-Saw_3510B.jpg
NT-MRS-14N-5034-Gang-Rip-Saw_3510C.jpg
NT-MRS-14N-5034-Gang-Rip-Saw_3510D.jpg
NT-MRS-14N-5034-Gang-Rip-Saw_3510E.jpg
NT-MRS-14N-5034-Gang-Rip-Saw_3510F.jpg
NT-MRS-14N-5034-Gang-Rip-Saw_3510G.jpg
NT-MRS-14N-5034-Gang-Rip-Saw_3510H.jpg
NT-MRS-14N-5034-Gang-Rip-Saw_3510I.jpg
NT-MRS-14N-5034-Gang-Rip-Saw_3510J.jpg
NT-MRS-14N-5034-Gang-Rip-Saw_3510K.jpg
NT-MRS-14N-5034-Gang-Rip-Saw_3510L.jpg
NT-MRS-14N-5034-Gang-Rip-Saw_3510M.jpg
NT-MRS-14N-5034-Gang-Rip-Saw_3510N.jpg
NT-MRS-14N-5034-Gang-Rip-Saw_3510O.jpg
NT-MRS-14N-5034-Gang-Rip-Saw_3510P.jpg
NT-MRS-14N-5034-Gang-Rip-Saw_3510Q.jpg
NT-MRS-14N-5034-Gang-Rip-Saw_3510R.jpg
NT-MRS-14N-5034-Gang-Rip-Saw_3510S.jpg
NT-MRS-14N-5034-Gang-Rip-Saw_3510T.jpg
NT MRS-14N-5034 Heavy Duty Multi-Blade Rip Saw
 

• Shown with OPTIONAL Infeed Table

• Close link chain vs. open (no dust or pinch point)

• Oiler has twice the number of lube points (critical)

• The VS adjustment location on the 14N.

• The 50 – 60HP models will include power raise & lower of the top

pressure group

• Can cut up to 4 3/8" with 14" blade vs. the MRS-12 12" blade.

* Can run the 12" as well on the MRS-14N*

• Bottom kickback fingers for added safety

• Saws, with proper tooling and material, can glue line

* Include one laser and bracket

* Include (1) carbide blades: 12" x 30T x 70mm x 3.5mm kerf

• (1) Tool box

• Warranty is one year parts

• All machines are tested stateside prior to shipment providing trouble free start up.  



  • Main Motor Hp. = 50 Hp.
  • Voltage/ Freq. = 460 Volt 60Hz
  • Phase = 3 Phase
  • Amp Requirement = 35 Amps
  • Feed Hp. = 2 Speed 1.5 / 3 Hp.
  • Feed System = Feed Chain
  • Feed Speed = 25 - 120 FPM
  • Variable Speed = Variable Speed Pulley
  • Elevation Hp. = 1/4 Hp.
  • Elevation Style = Manual Wheel Adjustment
  • Elevation Sys. = Jack Screw / Linear Guides
  • Total Hp. = 53.25 Hp.
  • Electronics = CE Approved Components
  • Dual Voltage = Elevation Arbor Motors
  • Control Voltage = 110 Volt
  • Assisted Start = Wye Delta
  • Pass-Line = 33-1/2''
  • Min. Length = 17-3/4''
  • Min. Width = 1/2''
  • Max. Width = 27-1/8''
  • Min. Thickness = 5/16''
  • Max. Thickness = 4-1/2''
  • Arbor Rpm = 3570 Rpm
  • Blade Size = 12'' Tungsten Carbide Tipped
  • No. of Teeth = 36 Tooth
  • Blade Kerf = 3.5 mm
  • Cleaning System = Brush on Chain
  • Vertical Travel = 3/8'' - 5''
  • Dust Collection = (2) 6'' @ 1962 CFM
  • Arbor Diameter = 70 mm
  • Hold Down Style = Pressure Plate
  • Kickback Finger = (2) Top (1) Bottom Sets
  • Emergency Stop = Push Button
  • Rear E Stop = Push Button
  • Safety Feature = Safety Interlock Switch
  • Guarding = Full Cabinet Enclosure
  • Oiler = Automatic Mechanical Oiler
  • Low Oil Warning = Low Oil Shut Off / Warning
  • Fence Type = Adjustable
  • Fence Dims. = 103'' Length
  • Frame Const. = 5/16'' Steel Construction
  • Worktable Dims. = 27-1/8'' x 64''
  • Infeed Table = 13-3/4'' x 103''
  • Laser = 100mw Laser Light & Mount Bracket
  • Decible Rating = 74 dB
  • Net Weight = 4402 Lbs.
  • Gross Weight = 4694 Lbs.
  • Machine Dims. = 67'' x 58'' x 71''
  • Packaging Dims = 72'' x 65'' x 77''


Item ID: 3510

Category: Gang Rip Saws

Our Price: Call for Price and Availability
 

Weight 4694.00 lbs
SKU 3510
: *
: *
: *
Type the characters you see in the picture:
Captcha

*
NT HBR-300S Horizontal Bandsaw

NT HBR-300S Horizontal Bandsaw

Call for Price and Availability

 
NT MRS300-5034 Gang Rip Saw

NT MRS300-5034 Gang Rip Saw

Call for Price and Availability

 
NT CS18L-1032 Up Cut Saw

NT CS18L-1032 Up Cut Saw

Call for Price and Availability