NT HBR-400XL Horizontal Bandsaw

NT HBR-400XL Horizontal Bandsaw

NT-HBR-400XL-Horizontal-Bandsaw_1960A.jpg
NT-HBR-400XL-Horizontal-Bandsaw_1960A.jpg
NT-HBR-400XL-Horizontal-Bandsaw_1960B.jpg
NT-HBR-400XL-Horizontal-Bandsaw_1960C.jpg
NT-HBR-400XL-Horizontal-Bandsaw_1960D.jpg
NT-HBR-400XL-Horizontal-Bandsaw_1960E.jpg
NT-HBR-400XL-Horizontal-Bandsaw_1960F.jpg
NT-HBR-400XL-Horizontal-Bandsaw_1960G.jpg
NT-HBR-400XL-Horizontal-Bandsaw_1960H.jpg
NT-HBR-400XL-Horizontal-Bandsaw_1960I.jpg
NT-HBR-400XL-Horizontal-Bandsaw_1960J.jpg
NT-HBR-400XL-Horizontal-Bandsaw_1960K.jpg
NT-HBR-400XL-Horizontal-Bandsaw_1960L.jpg
NT-HBR-400XL-Horizontal-Bandsaw_1960M.jpg
NT-HBR-400XL-Horizontal-Bandsaw_1960N.jpg
NT-HBR-400XL-Horizontal-Bandsaw_1960O.jpg
NT-HBR-400XL-Horizontal-Bandsaw_1960P.jpg
NT-HBR-400XL-Horizontal-Bandsaw_1960Q.jpg
NT-HBR-400XL-Horizontal-Bandsaw_1960R.jpg
NT-HBR-400XL-Horizontal-Bandsaw_1960S.jpg

Northtech Industrial NT-HBR-400XL Horizontal Band Resaw

 

Advanced Features in Precision Resawing

 

Increased HP to 40 to meet higher production needs.

 

32" diameter x 1-7/8" wide saw wheel (approximately 450lbs) for high centrifugal cutting force and vibration-free performance (6150 FPM).

 

16 ¾’’ maximum part capacity.

 

Production feed speed of up to 130' / minute. Note: with VFD, resaw can run as slow as

4 - 5' / minute if required.

 

Inverter feed allows fast feed setting to accommodate material type and width (with LED

readout).

 

Digital set works (PLC) for fast and precise settings (accurate to .002" automatic position).

 

Precision German spring tensioning of the blade for constant tension to band at 22,000 PSI.

 

Auto oil misting system improves blade life by up to 40 - 50% on many materials. (Only activated when material is present by sensor.)

 

Pneumatic raise & lower of top feed rollers is automatic. When material is presented, a sensor lifts and lowers onto the material on both sides of the blade. * Prevents material from slamming into the rollers and requires no adjustment within a 4" ± thickness range. * i.e. random thickness material requires no adjustment.

 

Remote and dust proof controls panel allows random placement, conveniently making the material placement and operator position a flexible option.



  • Main Motor Hp. = 40 hp.
  • Voltage/ Freq. = 460 Volt 60Hz
  • Phase = 3 Phase
  • Amp Requirement = 52.2 Amps
  • Feed Hp. = 1.5 Hp.
  • Feed System = 15-3/4'' Feed Belt
  • Drive System = Motor Mated to Gear Box
  • Variable Speed = Inverter Controlled
  • Elevation Hp. = 1.5 Hp.
  • Elevation Style = CH-525 Elevation Control
  • Elevation Sys. = (2) Post Jack Screw
  • Total Hp. = 43.5 Hp.
  • Electronics = CE Approved Components
  • Control Voltage = 220V Control Voltage
  • Assisted Start = Y Delta
  • Programmable = Elevation
  • Operator Panel = Mobile Cabinet
  • Pass-Line = 40-3/8''
  • Throat Capacity = 11-3/4'' x 8''
  • Min. Length = 30'' Between Hold Downs
  • Min. Width = 1-1/2''
  • Max. Width = 16-3/4''
  • Min. Thickness = 1/4''
  • Max. Thickness = 17''
  • Blade Speed = 6150 FPM
  • Tracking Style = Manual Adjustment
  • Tension Style = Manual Adjustment
  • Vertical Travel = 10-3/8''
  • Dust Collection = (2) 4'' @ 900 CFM
  • Digital Display = Elevation
  • Hold Down Style = (1) Infeed (1) Outfeed Pneumat
  • FLR Included = Filter, Lubricator, Regulater
  • Recommended CFM = 3/8'' Supply Line @ 90 Psi
  • Emergency Stop = Push Button
  • Oiler = Blade Oil Mister
  • Fence Type = Fixed Fence
  • Fence Dims. = 8-1/2'' x 18''
  • Blade Guide = Steel Blade Guides
  • Wheel Dims. = 1-7/8'' x 31-1/2''
  • Wheel Cnstr. = Steel Construction
  • Frame Const. = 1/2'' Steel Construction
  • Infeed Table = 17'' x 42-1/2''
  • Net Weight = 4321 Lbs
  • Gross Weight = 4761 Lbs.
  • Machine Dims. = 104'' x 125'' x 90''
  • Packaging Dims = 89'' x 68'' x 84''


Item ID: 1960

Category: Horizontal Band Saws

Our Price: Call for Price and Availability
 

Weight 4761.00 lbs
SKU 1960
: *
: *
: *
Type the characters you see in the picture:
Captcha

*
NT CS14R-734 Up Cut Saw

NT CS14R-734 Up Cut Saw

Call for Price and Availability

 
NT-2ST-20XL-RAL-2032

NT-2ST-20XL-RAL-2032

Call for Price and Availability

 
NT SLR-12SC-1532

NT SLR-12SC-1532

Call for Price and Availability