NT HBR-300S Horizontal Bandsaw

NT HBR-300S Horizontal Bandsaw

NT-HBR-300S-Horizontal-Bandsaw_1182A.jpg
NT-HBR-300S-Horizontal-Bandsaw_1182A.jpg
NT-HBR-300S-Horizontal-Bandsaw_1182B.jpg
NT-HBR-300S-Horizontal-Bandsaw_1182C.jpg
NT-HBR-300S-Horizontal-Bandsaw_1182D.jpg
NT-HBR-300S-Horizontal-Bandsaw_1182E.jpg
NT-HBR-300S-Horizontal-Bandsaw_1182F.jpg
NT-HBR-300S-Horizontal-Bandsaw_1182G.jpg
NT-HBR-300S-Horizontal-Bandsaw_1182H.jpg
NT-HBR-300S-Horizontal-Bandsaw_1182I.jpg
NT-HBR-300S-Horizontal-Bandsaw_1182J.jpg
NT-HBR-300S-Horizontal-Bandsaw_1182K.jpg
NT-HBR-300S-Horizontal-Bandsaw_1182L.jpg
NT-HBR-300S-Horizontal-Bandsaw_1182M.jpg
NT-HBR-300S-Horizontal-Bandsaw_1182N.jpg
NT-HBR-300S-Horizontal-Bandsaw_1182O.jpg
NT-HBR-300S-Horizontal-Bandsaw_1182P.jpg
NT-HBR-300S-Horizontal-Bandsaw_1182Q.jpg
NT-HBR-300S-Horizontal-Bandsaw_1182R.jpg
NT-HBR-300S-Horizontal-Bandsaw_1182S.jpg
NT-HBR-300S-Horizontal-Bandsaw_1182T.jpg
NT-HBR-300S-Horizontal-Bandsaw_1182U.jpg
NT-HBR-300S-Horizontal-Bandsaw_1182V.jpg
NT-HBR-300S-Horizontal-Bandsaw_1182W.jpg
NT HBR-300S Horizontal Bandsaw


  • Main Motor Hp. = 20 Hp.
  • Voltage/ Freq. = 460 Volt 60Hz
  • Phase = 3 Phase
  • Amp Requirement = 45 Amps
  • Feed Hp. = 5 Hp.
  • Feed System = 11'' x 218'' Hydraulic Drive Belt
  • Drive System = 5 Hp. Hydraulic Pump
  • Feed Speed = 0 - 95 FPM
  • Variable Speed = Hydraulic Adjustment Knob
  • Reverse Feed = Yes
  • Elevation Hp. = 1/4 Hp.
  • Elevation Style = Auto Touch Screen Control
  • Elevation Sys. = (2) Post Jack Screw
  • Total Hp. = 30-1/4 Hp.
  • Electronics = CE Approved Components
  • Control Voltage = 230 Volt / 24 Volt
  • Assisted Start = Y Delta
  • Programmable = Elevation
  • Touch Screen = 6'' Digital Touch Screen
  • Operator Panel = Fixed
  • Cut Envelope = 6-3/4'' x 11-3/4''
  • Min. Length = 16''
  • Max. Length = Infinite
  • Min. Width = 1.5''
  • Max. Width = 11-3/4''
  • Min. Thickness = 1/4''
  • Max. Thickness = 11-1/2''
  • Blade Size = 1'' x 170'' Bandsaw Blade
  • No. of Teeth = 4 TPI
  • Tooth Spacing = 5/16''
  • Blade Kerf = .063 In.
  • Blade Speed = 6200 FPM
  • Cleaning System = Weighted Wheel Scrapers
  • Tracking Style = Manual Adjustment
  • Tension Style = Hydraulic Tension
  • Vertical Travel = 1/4'' x 6-3/4''
  • Dust Collection = (1) 6'' @ 981 CFM
  • Dust Port Out = 6'' Bottom
  • Arbor Diameter = 2''
  • Digital Display = 6'' Digital Display
  • Conveyor = Rubber Belt
  • Hold Down Style = (1) Infeed (1) Outfeed Pneumat
  • FLR Included = Filter, Lubricator, Regulater
  • Recommended CFM = 981 CFM
  • Emergency Stop = Push Button
  • Rear E Stop = Push Button
  • Guarding = Full Cabinet Enclosure
  • Oiler = Blade Oil Mister
  • Fence Type = Steel
  • Fence Dims. = 6-1/2'' Tall
  • Tiltable = 30 Degree Tilt
  • Blade Guide = Steel Blade Guides
  • Wheel Dims. = 1'' x 28''
  • Wheel Cnstr. = Steel Construction
  • Frame Const. = 3/16'' Steel Construction
  • Infeed Table = 11-1/4'' x 109''
  • Return Conveyor = 7-1/4'' x 109''
  • Measure Meth. = Precision Encoder
  • Decible Rating = 72 dB
  • Machine Dims. = 109'' x 85-1/2'' x 80''
  • Packaging Dims = 111'' x 89'' x 85''


Item ID: 1182

Category: Horizontal Band Saws

Our Price: Call for Price and Availability
 

Weight 5000.00 lbs
SKU 1182
: *
: *
: *
Type the characters you see in the picture:
Captcha

*
NT 750-10 Pneumatic Overarm Pin Router

NT 750-10 Pneumatic Overarm Pin Router

Call for Price and Availability

 
NT ES636SE-332 Edge Sander

NT ES636SE-332 Edge Sander

Call for Price and Availability

 
NT UltiMate 1500 Series Crossfeed Veneer Splicer

NT UltiMate 1500 Series Crossfeed Veneer Splicer

Call for Price and Availability