NT AW-400PBX Horizontal Bandsaw

NT AW-400PBX Horizontal Bandsaw

NT-AW-400PBX-Horizontal-Bandsaw_1178A.jpg
NT-AW-400PBX-Horizontal-Bandsaw_1178A.jpg
NT-AW-400PBX-Horizontal-Bandsaw_1178B.jpg
NT-AW-400PBX-Horizontal-Bandsaw_1178C.jpg
NT-AW-400PBX-Horizontal-Bandsaw_1178D.jpg
NT-AW-400PBX-Horizontal-Bandsaw_1178E.jpg
NT-AW-400PBX-Horizontal-Bandsaw_1178F.jpg
NT-AW-400PBX-Horizontal-Bandsaw_1178G.jpg
NT-AW-400PBX-Horizontal-Bandsaw_1178H.jpg
NT-AW-400PBX-Horizontal-Bandsaw_1178I.jpg
NT-AW-400PBX-Horizontal-Bandsaw_1178J.jpg
NT-AW-400PBX-Horizontal-Bandsaw_1178K.jpg
NT-AW-400PBX-Horizontal-Bandsaw_1178L.jpg
NT-AW-400PBX-Horizontal-Bandsaw_1178M.jpg
NT-AW-400PBX-Horizontal-Bandsaw_1178N.jpg
NT-AW-400PBX-Horizontal-Bandsaw_1178O.jpg
NT-AW-400PBX-Horizontal-Bandsaw_1178P.jpg
NT-AW-400PBX-Horizontal-Bandsaw_1178Q.jpg
NT-AW-400PBX-Horizontal-Bandsaw_1178R.jpg
NT AW-400PBX Horizontal Bandsaw


  • Main Motor Hp. = 40 Hp.
  • Voltage/ Freq. = 460 Volt 60Hz
  • Phase = 3 Phase
  • Amp Requirement = 65 Amp
  • Feed Hp. = 3 Hp.
  • Feed System = 15-1/4'' x 215-3/8'' Belt
  • Drive System = Motor Mated to Gear Box
  • Feed Speed = 0 - 120 FPM
  • Variable Speed = Inverter Controlled
  • Elevation Hp. = 1 Hp.
  • Elevation Style = CHPC-535 Digital Control
  • Elevation Sys. = (2) Post Jack Screw
  • Total Hp. = 45 Hp.
  • Electronics = UL Approved Components
  • Control Voltage = 220V Control Voltage
  • Min. Length = Individual Feed 20''
  • Min. Width = 2"
  • Max. Width = 17-1/2''
  • Min. Thickness = 1/8''
  • Max. Thickness = 10''
  • Blade Size = 2'' x 208''
  • No. of Teeth = 208
  • Tooth Spacing = 1''
  • Blade Kerf = .086
  • Blade Speed = 4700 - 6750 FPM
  • Tracking Style = Manual Adjustment
  • Tension Style = Pneumatic / Hydraulic Tension
  • Vertical Travel = 1/8'' - 10''
  • Dust Collection = (2) 6'' @ 981 CFM
  • Dust Port Out = (2) 6'' Ports
  • Digital Display = Elevation
  • Conveyor = 15-1/4'' x 215-3/8''
  • Hold Down Style = Pneumatic / Gravity
  • FLR Included = Filter, Lubricator, Regulater
  • Recommended CFM = 1000 CFM @ Extraction Point
  • Emergency Stop = Push Button
  • Rear E Stop = Push Button
  • Guarding = Full Cabinet Enclosure
  • Oiler = Blade Oil Mister
  • Tiltable = 30 Degree Tilt
  • Blade Guide = Steel Blade Guides
  • Wheel Dims. = 1-3/4'' x 33-1/2''
  • Wheel Cnstr. = Steel Construction
  • Frame Const. = 1/4'' Steel Construction
  • Worktable Dims. = 15'' x 109''
  • Table Const. = Steel
  • Return Conveyor = 7-1/4'' x 218'' Belt
  • Decible Rating = 80 dB
  • Net Weight = 3674
  • Gross Weight = 4090 Lbs.
  • Machine Dims. = 117'' x 100'' x 88''
  • Packaging Dims = 120'' x 102'' x 90''


Item ID: 1178

Category: Horizontal Band Saws

Our Price: Call for Price and Availability
 

Weight 4000.00 lbs
SKU 1178
: *
: *
: *
Type the characters you see in the picture:
Captcha

*
NT CS18L-1032 Up Cut Saw

NT CS18L-1032 Up Cut Saw

Call for Price and Availability

 
NT DC40 Stock Feeder

NT DC40 Stock Feeder

Call for Price and Availability

 
NT VeneerPlus G1 Longitudinal Veneer Splicers

NT VeneerPlus G1 Longitudinal Veneer Splicers

Call for Price and Availability