NT 770HSK-1032 Spindle Shaper

NT 770HSK-1032 Spindle Shaper

NT-770HSK-1032-Spindle-Shaper_1383A.jpg
NT-770HSK-1032-Spindle-Shaper_1383A.jpg
NT-770HSK-1032-Spindle-Shaper_1383B.jpg
NT-770HSK-1032-Spindle-Shaper_1383C.jpg
NT-770HSK-1032-Spindle-Shaper_1383D.jpg
NT-770HSK-1032-Spindle-Shaper_1383E.jpg
NT-770HSK-1032-Spindle-Shaper_1383F.jpg
NT-770HSK-1032-Spindle-Shaper_1383G.jpg
NT-770HSK-1032-Spindle-Shaper_1383H.jpg
NT-770HSK-1032-Spindle-Shaper_1383I.jpg
NT-770HSK-1032-Spindle-Shaper_1383J.jpg
NT-770HSK-1032-Spindle-Shaper_1383K.jpg
NT-770HSK-1032-Spindle-Shaper_1383L.jpg
NT-770HSK-1032-Spindle-Shaper_1383M.jpg
NT-770HSK-1032-Spindle-Shaper_1383N.jpg
NT-770HSK-1032-Spindle-Shaper_1383O.jpg
NT-770HSK-1032-Spindle-Shaper_1383P.jpg
NT-770HSK-1032-Spindle-Shaper_1383Q.jpg
NT-770HSK-1032-Spindle-Shaper_1383R.jpg
NT-770HSK-1032-Spindle-Shaper_1383S.jpg
NT-770HSK-1032-Spindle-Shaper_1383T.jpg

NT 770HSK Spindle Shaper

 

• 3,000 - 13,350RPM, 10HP inverter controlled spindle

• (1) 1-1/4'' x 4’’ HSK-63F spindle included

• HSK-63F spindle release system is developed by Andi CNC Machining Centers

• Spindle tolerance of .0001" *

• Includes sensor light to ensure proper mating of the

chucks as well as correct full pneumatic pressure for safety

• Moveable overarm control panel

• 35" Ergonomically designed precision milled table

• (1) Tool box

• Warranty is one year parts

• All machines are tested stateside prior to shipment providing trouble free start up.



  • Machine Hp. = 11 Hp.
  • Main Motor Hp. = 10 hp.
  • Reverse Motor = Reversible
  • Voltage/ Freq. = 230 Volt 60Hz
  • Phase = 3 Phase
  • Amp Requirement = 30 Amps
  • 1st Spindle = 1-1/4'' x 4'' Spindle
  • Spindle Diam. = 1-1/4''
  • Spindle RPM = 13350 Rpm Adjustable
  • Under Nut Cap. = 4-1/4''
  • Elevation Hp. = 1 Hp.
  • Elevation Style = Push Button
  • Elevation Sys. = Jack Screw / Quill Housing
  • Total Hp. = 11 Hp.
  • Electronics = CE Approved Components
  • Dual Voltage = 230/460 Volt
  • Control Voltage = 110 Volt
  • Programmable = Elevation
  • Operator Panel = Adjustable Operator Panel
  • Pass-Line = 35''
  • Vertical Travel = 4-1/8'' Spindle Travel
  • Dust Collection = (1) 4'' (1) 5'' @ 1117 CFM
  • Dust Port Out = (1) 4'' (1) 5''
  • Digital Display = Elevation
  • FLR Included = Filter, Lubricator, Regulater
  • Recommended CFM = 1/4'' Line @ 90 PSI
  • Emergency Stop = Push Button
  • Fence Type = Adjustable
  • Fence Dims. = (2) 5-1/2'' x 24''
  • Micro Fence = Micro Adjustable
  • Brake System = Electronic Braking
  • Frame Const. = 3/16'' Steel Construction
  • Worktable Dims. = 38'' x 51''
  • Table Const. = Cast Iron
  • Measure Meth. = Precision Encoder
  • Decible Rating = 83 dB
  • Net Weight = 1650 Lbs.
  • Gross Weight = 1850 Lbs.
  • Machine Dims. = 54'' x 42'' x 66-1/4''
  • Packaging Dims = 59'' x 45'' x 75''


Item ID: 1383

Category: Shapers

Our Price: Call for Price and Availability
 

Weight 1850.00 lbs
SKU 1383
: *
: *
: *
Type the characters you see in the picture:
Captcha

*
NT 750-10 Pneumatic Overarm Pin Router

NT 750-10 Pneumatic Overarm Pin Router

Call for Price and Availability

 
NT N6230 Six Spindle Moulder

NT N6230 Six Spindle Moulder

Call for Price and Availability

 
NT UltiMate 1500 Series Crossfeed Veneer Splicer

NT UltiMate 1500 Series Crossfeed Veneer Splicer

Call for Price and Availability