NT 750-10 Pneumatic Overarm Pin Router

NT 750-10 Pneumatic Overarm Pin Router

NT-750-10-Pneumatic-Overarm-Pin-Router_1267A.jpg
NT-750-10-Pneumatic-Overarm-Pin-Router_1267A.jpg
NT-750-10-Pneumatic-Overarm-Pin-Router_1267B.jpg
NT-750-10-Pneumatic-Overarm-Pin-Router_1267C.jpg
NT-750-10-Pneumatic-Overarm-Pin-Router_1267D.jpg
NT-750-10-Pneumatic-Overarm-Pin-Router_1267E.jpg
NT-750-10-Pneumatic-Overarm-Pin-Router_1267F.jpg
NT-750-10-Pneumatic-Overarm-Pin-Router_1267G.jpg
NT-750-10-Pneumatic-Overarm-Pin-Router_1267H.jpg
NT-750-10-Pneumatic-Overarm-Pin-Router_1267I.jpg
NT-750-10-Pneumatic-Overarm-Pin-Router_1267J.jpg
NT-750-10-Pneumatic-Overarm-Pin-Router_1267K.jpg
NT-750-10-Pneumatic-Overarm-Pin-Router_1267L.jpg
NT-750-10-Pneumatic-Overarm-Pin-Router_1267M.jpg
NT-750-10-Pneumatic-Overarm-Pin-Router_1267N.jpg
NT-750-10-Pneumatic-Overarm-Pin-Router_1267O.jpg
NT-750-10-Pneumatic-Overarm-Pin-Router_1267P.jpg
NT-750-10-Pneumatic-Overarm-Pin-Router_1267Q.jpg

NT 750-10 Overarm Pin Router

 

• 10HP spindle drive motor

• Chuck to table top maximum: 7-1/2"

• Throat clearance: 700mm (27-½")

• 2 Speed Spindle: 8,100 / 16,300 RPM

• Spindle travel: 95mm (3-¾")

• Depth stops: 6 position turret stops, adjustable

• Table travel: 190mm (7-½")

• Table surface area: 915mm x 101mm (36" x 40")

• Table tilt: 45° front downward

• Micrometric table raise: 1/32" (1mm) per full revolution of hand wheel

• 35 x 2330mm (1-3/8" x 92") flat belt

• Dust port size: (1) 3" requiring 350 CFM at point of extraction

• Net weight / Gross weight: 1465 lbs / 1650 lbs

• Packing dimensions: (L) 66" x (W) 44" x (H) 71"

• (1) Tool box

• Warranty is one year parts

• All machines are tested stateside prior to shipment providing trouble free start up.



  • Machine Hp. = 10 Hp.
  • Voltage/ Freq. = 230 Volt 60Hz
  • Phase = 3 Phase
  • Amp Requirement = 26 Amps
  • Configuration = 1/4'' 3/8'' 1/2'' Collet
  • Spindle RPM = 8100 / 16300 RPM
  • Elevation Style = Manual Wheel Adjustment
  • Elevation Sys. = Jack Screw / Linear Guides
  • Total Hp. = 10 Hp.
  • Electronics = CE Approved Components
  • Control Voltage = 230 Volt
  • Throat Capacity = 22''
  • Min. Thickness = 1-1/2'' Collet to Table
  • Max. Thickness = 7-1/2'' Collet to Table
  • Vertical Travel = 7-1/2''
  • Dust Collection = (1) 3'' @ 245 CFM
  • Dust Port Out = 3''
  • Emergency Stop = Push Button
  • Guarding = High Visiblity Gaurding
  • Operation Style = Pneumatic Foot Pedal
  • Fence Type = Adjustable Fence
  • Fence Dims. = 2-1/2'' x 40''
  • Tiltable = 45 Degrees
  • Frame Const. = 3/8 Steel Construction
  • Worktable Dims. = 39-3/4'' x 35-1/2''
  • Table Const. = Machined Steel
  • Decible Rating = 73 Db
  • Net Weight = 1462 Lbs.
  • Gross Weight = 1647 lbs.
  • Machine Dims. = 40'' x 62'' x 64''
  • Packaging Dims = 44'' x 66'' x 71''


Item ID: 1267

Category: Routers

Our Price: Call for Price and Availability
 

Weight 1647.00 lbs
SKU 1267
: *
: *
: *
Type the characters you see in the picture:
Captcha

*
NT 12-1100RP

NT 12-1100RP

Call for Price and Availability

 
NT VeneerSolid M1 Longitudinal Veneer Splicer

NT VeneerSolid M1 Longitudinal Veneer Splicer

Call for Price and Availability

 
NT CutMate 2800D Series Double Knife Veneer Guillotine

NT CutMate 2800D Series Double Knife Veneer Guillotine

Call for Price and Availability