NT 735LT-1034 Shaper

NT 735LT-1034 Shaper

NT-735LT-1034-Shaper_3618A.jpg
NT-735LT-1034-Shaper_3618A.jpg
NT-735LT-1034-Shaper_3618B.jpg
NT-735LT-1034-Shaper_3618C.jpg
NT-735LT-1034-Shaper_3618D.jpg
NT-735LT-1034-Shaper_3618E.jpg
NT-735LT-1034-Shaper_3618F.jpg
NT-735LT-1034-Shaper_3618G.jpg
NT-735LT-1034-Shaper_3618H.jpg
NT-735LT-1034-Shaper_3618I.jpg
NT-735LT-1034-Shaper_3618J.jpg
NT-735LT-1034-Shaper_3618K.jpg
NT-735LT-1034-Shaper_3618L.jpg
NT-735LT-1034-Shaper_3618M.jpg
NT-735LT-1034-Shaper_3618N.jpg
NT-735LT-1034-Shaper_3618O.jpg
NT 735LT-1034 Shaper
 

Options:

 

• Sliding table with 8 rollers bearings

• Tilting spindle assembly (-5 / + 45 Degrees)

• Tilting Spindle / Sliding Table

• Optional 7” under nut spindle with spacers and nut (MK5 series)

• Optional 15HP motor

• Voltage change to 460 volt

Optional 3/4'', 1'', 1-1/4'' spindle with spacer nut (MK5 series)

• Optional 40mm spindle with spacers and nut (MK5 series)

• M-10 digital LED readout of spindle height (installed)

• DP-727 digital electronic set works with power raise and lower

  lower plus 99 positions memory / recall

• (1) Tool box

• Warranty is one year parts

• All machines are tested stateside prior to shipment providing trouble free start up.



  • Reverse Motor = Reversible
  • Machine Hp. = 10 hp.
  • Voltage/ Freq. = 230 Volt 60Hz
  • Phase = 1 Phase
  • Amp Requirement = 25 Amps
  • Spindle Diam. = 1-1/4''
  • Spindle RPM = 2875 - 9500 Rpm
  • Under Nut Cap. = 6''
  • Elevation Style = Manual Wheel Adjustment
  • Elevation Sys. = Jack Screw / Quill Housing
  • Electronics = UL Approved Components
  • Dual Voltage = 230/460 Volt
  • Control Voltage = 110 Volt
  • Pass-Line = 35''
  • Vertical Travel = 6''
  • Dust Collection = (1) 5'' @ 681 CFM
  • Emergency Stop = (1) Push Putton (2) Bars
  • Fence Type = Micro Adjustment Fence
  • Fence Dims. = (2) 6'' x 23-3/4''
  • Micro Fence = Micro Adjustable
  • Tiltable = -5 / +45 Degrees
  • Brake System = Foot Pedal Brake
  • Frame Const. = 1/4'' Steel Construction
  • Worktable Dims. = 36'' x 47-3/4''
  • Table Const. = Cast Iron
  • Infeed Table = 20''
  • Outfeed Table = 20''
  • Measure Meth. = PT28 Digital Readout
  • Decible Rating = 73 Db
  • Net Weight = 1770 Lbs
  • Gross Weight = 1955 Lbs.
  • Machine Dims. = 88'' x 48'' x 50''
  • Packaging Dims = 91'' x 55'' x 53''


Item ID: 3618

Category: Shapers

Our Price: Call for Price and Availability
 

Weight 1955.00 lbs
SKU 3618
: *
: *
: *
Type the characters you see in the picture:
Captcha

*
The code is case-sensitive and must be entered exactly as above.
NT ES1248SE Edge Sander

NT ES1248SE Edge Sander

Call for Price and Availability

 
NT UltiMate 3400 Series Crossfeed Veneer Splicer

NT UltiMate 3400 Series Crossfeed Veneer Splicer

Call for Price and Availability

 
NT CS36R-2532 Timber Up Cut Saw

NT CS36R-2532 Timber Up Cut Saw

Call for Price and Availability