NT 660S-25HCVS-2034 Single Surface Planer

NT 660S-25HCVS-2034 Single Surface Planer

NT-660S-25HCVS-2034-Single-Surface-Planer_1093A.jpg
NT-660S-25HCVS-2034-Single-Surface-Planer_1093A.jpg
NT-660S-25HCVS-2034-Single-Surface-Planer_1093B.jpg
NT-660S-25HCVS-2034-Single-Surface-Planer_1093C.jpg
NT-660S-25HCVS-2034-Single-Surface-Planer_1093D.jpg
NT-660S-25HCVS-2034-Single-Surface-Planer_1093E.jpg
NT-660S-25HCVS-2034-Single-Surface-Planer_1093F.jpg
NT-660S-25HCVS-2034-Single-Surface-Planer_1093G.jpg
NT-660S-25HCVS-2034-Single-Surface-Planer_1093H.jpg
NT-660S-25HCVS-2034-Single-Surface-Planer_1093I.jpg
NT-660S-25HCVS-2034-Single-Surface-Planer_1093J.jpg
NT-660S-25HCVS-2034-Single-Surface-Planer_1093K.jpg
NT-660S-25HCVS-2034-Single-Surface-Planer_1093L.jpg
NT-660S-25HCVS-2034-Single-Surface-Planer_1093M.jpg
NT-660S-25HCVS-2034-Single-Surface-Planer_1093N.jpg
NT-660S-25HCVS-2034-Single-Surface-Planer_1093O.jpg
NT-660S-25HCVS-2034-Single-Surface-Planer_1093P.jpg
NT-660S-25HCVS-2034-Single-Surface-Planer_1093Q.jpg
NT-660S-25HCVS-2034-Single-Surface-Planer_1093R.jpg
NT-660S-25HCVS-2034-Single-Surface-Planer_1093S.jpg
NT-660S-25HCVS-2034-Single-Surface-Planer_1093T.jpg
NT 660S-25HCVS-2034 Single Surface Planer
 
• Helical 4" cutterhead provides high chip removal rate, superior surface finish & low noise level (under 85 dba).
• Powerful 20HP cutterhead motor; 2HP feed motor makes this planer ideal for heavy  duty planing and meets high production requirements. Arranged with Y-Delta soft start controls (Square D).
•Main motor is Nema rated and standard with 2 year warranty and service throughout  North America.
• Digital positioning controller for convenient thickness setting (with memory control to 99 thickness settings).
• Variable feed speed is driven by a VFD and TECO inverter duty DC motor (0-90' min) with LED readout of  feeding speed.
• Powered table elevation for fast and convenient thickness setting. Opening has been increased to 12" on  NT-660S series planers vs. 8" on the standard NT-660 planers.  
• Extra heavy, rib reinforced cast iron table is surface precision ground. 660S-20HCVS has (4) precision 35mm  jack screws to support the planer's rugged construction.
• Adjustable bed rollers ensure fast and proper positioning with regards to rough lumber to finished   glue panels.
• UV rubber outfeed roller provides optimum finish with reduced vibration.
• Corrugated sectional infeed roller has independent yield for running strip stock of varying thickness without  the danger of kick back.
• Anti-kickback fingers equipped at the infeed end provide added safety for the operator.
• Raising and lowering limit controls for powered table elevation


  • Top Head Hp. = 25 Hp.
  • Voltage/ Freq. = 460 Volt 60Hz
  • Phase = 3 Phase
  • Amp Requirement = 29 Amps
  • Feed Hp. = 2 Hp.
  • Feed System = (2) Segmented/(1) Rubber Roll
  • Drive System = Belt
  • Feed Speed = 5 - 75 FPM
  • Variable Speed = Inverter Controlled
  • Elevation Hp. = 1 Hp.
  • Elevation Style = REC 727M Elevation Control
  • Elevation Sys. = (4) Post Jack Screw
  • Total Hp. = 28 Hp.
  • Electronics = CE Approved Components
  • Dual Voltage = 230/460 Volt
  • Control Voltage = 110 Volt
  • Programmable = REC 727M Elevation Control
  • Min. Length = 10''
  • Min. Width = 1''
  • Max. Width = 26"
  • Min. Thickness = 3/16"
  • Max. Thickness = 12''
  • Cutter Head RPM = 1800 Rpm
  • Tooling = 15 x 15 x 2.5 mm
  • Head Type = Dynamically Balanced Helical Head
  • Cutter Head Dim = 4'' x 26''
  • Cut Head Matl. = Alloy Steel
  • Rows of Cutters = 6 Rows
  • No. of Inserts = 156 Inserts
  • Insert Size = 15 x 15 x 2.5 mm
  • Dust Collection = 981 CFM @ Extraction Point
  • Dust Port Out = 6'' Top
  • Digital Display = Elevation and Feed Speed
  • Powered Rollers = (3) Top Powered Rollers
  • Idle Rollers = (2) Idle Bed Rollers
  • Pressure Shoes = 26'' Spring Loaded Pressure
  • Recommended CFM = 480 nl/min
  • Frame Const. = 1/4'' Steel/Cast Iron Construc
  • Decible Rating = 70 dB
  • Net Weight = 2420 Lbs.
  • Gross Weight = 2770 Lbs.
  • Machine Dims. = 44'' x 39'' x 55''
  • Packaging Dims = 52'' x 51'' x 55''


Item ID: 1093

Category: Single Surface Planers

Our Price: Call for Price and Availability
 

Weight 2770.00 lbs
SKU 1093
: *
: *
: *
Type the characters you see in the picture:
Captcha

*
NT CS18L-1032 Up Cut Saw

NT CS18L-1032 Up Cut Saw

Call for Price and Availability

 
NT DC40 Stock Feeder

NT DC40 Stock Feeder

Call for Price and Availability

 
NT VeneerPlus G1 Longitudinal Veneer Splicers

NT VeneerPlus G1 Longitudinal Veneer Splicers

Call for Price and Availability