NT 525S-732 Sliding Table Shaper

NT 525S-732 Sliding Table Shaper

NT-525S-732-Sliding-Table-Shaper_4545A.jpg
NT-525S-732-Sliding-Table-Shaper_4545A.jpg
NT-525S-732-Sliding-Table-Shaper_4545B.jpg
NT-525S-732-Sliding-Table-Shaper_4545C.jpg
NT-525S-732-Sliding-Table-Shaper_4545D.jpg
NT-525S-732-Sliding-Table-Shaper_4545E.jpg
NT-525S-732-Sliding-Table-Shaper_4545F.jpg
NT 525S-732 Sliding Table Shaper


  • Machine Hp. = 7.5 hp.
  • Voltage/ Freq. = 230 Volt 60Hz
  • Phase = 3 Phase
  • Amp Requirement = 21 Amps
  • Spindle Diam. = 1-1/4''
  • Spindle RPM = 3000 - 10000 RPM
  • Under Nut Cap. = 5''
  • Elevation Style = Manual Wheel Adjustment
  • Elevation Sys. = Quill Housing/Jack Screw
  • Total Hp. = 7.5 Hp.
  • Electronics = CE Approved Components
  • Dual Voltage = 230/460 Volt
  • Control Voltage = 110 Volt / 24 Volt
  • Pass-Line = 34-1/4''
  • Vertical Travel = Spindle 5''
  • Dust Collection = (1) 4'' @ 450 CFM
  • Hold Down Style = Adjustable Metal Hold Downs
  • Total Clamps = (1) Sliding Table Clamp
  • Emergency Stop = Push Button
  • Fence Type = Micro Adjustment Fence
  • Fence Dims. = (2) 5'' x 17''
  • Sliding Table = 33-1/2'' Travel
  • Frame Const. = Cast Construction
  • Worktable Dims. = 35-1/2'' x 27-1/2''
  • Table Const. = Cast Iron
  • Decible Rating = 70 dB
  • Net Weight = 882 Lbs.
  • Gross Weight = 980 Lbs.
  • Machine Dims. = 35'' x 41'' x 43''
  • Packaging Dims = 41'' x 38'' x 48''


Item ID: 4545

Category: Shapers

Our Price: Call for Price and Availability
 

Weight 980.00 lbs
SKU 4545
: *
: *
: *
Type the characters you see in the picture:
Captcha

*
NT CS18R-1034 Up Cut Saw

NT CS18R-1034 Up Cut Saw

Call for Price and Availability

 
NT 660S-20HCVS-2032 Single Surface Planer

NT 660S-20HCVS-2032 Single Surface Planer

Call for Price and Availability

 
NT CS36R-2532 Timber Up Cut Saw

NT CS36R-2532 Timber Up Cut Saw

Call for Price and Availability