NT MRS300-5032 Gang Rip Saw

NT MRS300-5032 Gang Rip Saw

NT-MRS300-5032-Gang-Rip-Saw_1380A.jpg
NT-MRS300-5032-Gang-Rip-Saw_1380A.jpg
NT-MRS300-5032-Gang-Rip-Saw_1380B.jpg
NT-MRS300-5032-Gang-Rip-Saw_1380C.jpg
NT-MRS300-5032-Gang-Rip-Saw_1380D.jpg
NT-MRS300-5032-Gang-Rip-Saw_1380E.jpg
NT-MRS300-5032-Gang-Rip-Saw_1380F.jpg
NT-MRS300-5032-Gang-Rip-Saw_1380G.jpg
NT-MRS300-5032-Gang-Rip-Saw_1380H.jpg
NT-MRS300-5032-Gang-Rip-Saw_1380I.jpg
NT-MRS300-5032-Gang-Rip-Saw_1380J.jpg
NT-MRS300-5032-Gang-Rip-Saw_1380K.jpg
NT-MRS300-5032-Gang-Rip-Saw_1380L.jpg
NT-MRS300-5032-Gang-Rip-Saw_1380M.jpg
NT-MRS300-5032-Gang-Rip-Saw_1380N.jpg
NT-MRS300-5032-Gang-Rip-Saw_1380O.jpg
NT-MRS300-5032-Gang-Rip-Saw_1380P.jpg
NT-MRS300-5032-Gang-Rip-Saw_1380Q.jpg
NT-MRS300-5032-Gang-Rip-Saw_1380R.jpg
NT-MRS300-5032-Gang-Rip-Saw_1380S.jpg
NT-MRS300-5032-Gang-Rip-Saw_1380T.jpg
NT MRS300-5032 Gang Rip Saw
 

 

• Saw arbor motor: 50 HP

• Feed motor: 2 HP (3HP on request)

• Max. cutting thickness: 5''

• Max. cutting thickness (w/short stock device): 95 mm (3.74") (optional)

• Max. cutting width: 300 mm (12")

• Distance from column to link chain center: 29-1/2''

• Min. working length: 500 mm (19.685")

• Min. working length (w/short stock device): 300 mm (11.811") (optional)

• Max. sawblade diameter: 12''

• Min. sawblade diameter" 10''

• Sawblade bore: 70 mm

• Saw arbor diameter: 50 mm

• Saw arbor speed: 3775 RPM

• Variable feed speed: 25-100 FPM

• Hold down roller elevating motor: 0.5 HP

• Table area (LxW):  60"x30"

• Machine dimensions (LxWxH): 81' x 61'' x 70''

• Packing dimensions (LxWxH): 65'' x 68'' x 65''

• Net weight: 4,525 lbs.

• Gross Weight: 4725 Lbs.

• Warranty is one year parts

• All machines are tested stateside prior to shipment providing trouble free start up.



  • Main Motor Hp. = 50 Hp.
  • Voltage/ Freq. = 230 Volt 60Hz
  • Phase = 3 Phase
  • Amp Requirement = 68.4 Amps
  • Feed Hp. = 2/1 Hp. 2 Speed
  • Feed System = 12'' Dip Chain
  • Drive System = Variable Speed Pulley
  • Feed Speed = 25 - 100 FPM
  • Variable Speed = 229 Variable Speed Pulley
  • Elevation Hp. = 1/2 Hp.
  • Elevation Style = Push Button
  • Elevation Sys. = Jack Screw / Linear Guides
  • Total Hp. = 52.5 Hp.
  • Electronics = CE Approved Components
  • Dual Voltage = 230/460 Volt
  • Control Voltage = 110 Volt
  • Assisted Start = Y Delta
  • Throat Capacity = 29-1/2''
  • Min. Length = 13'' 1st Roller to Kickback
  • Min. Thickness = 1/16''
  • Max. Thickness = 5''
  • Arbor Rpm = 3775 Rpm.
  • Blade Size = 12'' Tungsten Carbide Tipped
  • No. of Teeth = 36 Tooth
  • Tooth Spacing = 1-1/8''
  • Blade Kerf = .160 In.
  • Tension Style = Gravity
  • Dust Collection = (2) 6'' @ 1962 CFM
  • Dust Port Out = (2) 6'' Ports
  • Arbor Diameter = 50 mm
  • Idle Rollers = (4) Top Idle Rollers
  • Hold Down Style = (4) Spring Loaded Rollers
  • Kickback Finger = (2) Top Sets (1) Bottom Set
  • Rear E Stop = Push Button
  • Safety Feature = Safety Interlock Switch
  • Guarding = Full Cabinet Enclosure
  • Oiler = Auto Oiler
  • Low Oil Warning = Low Oil Shut Off / Warning
  • Fence Type = Adjustable
  • Fence Dims. = 2-1/4'' x 27-1/2''
  • Frame Const. = 3/4'' Steel Construction
  • Worktable Dims. = 30'' x 60''
  • Table Const. = Cast Iron
  • Laser = 4 100mw Laser Lights & Bracket
  • Decible Rating = 75 dB
  • Net Weight = 4525 Lbs.
  • Gross Weight = 4725 Lbs.
  • Machine Dims. = 81'' x 61'' x 70''
  • Packaging Dims = 66'' x 30'' x 53''


Item ID: 1380

Category: Gang Rip Saws

Our Price: Call for Price and Availability
 

Weight 4725.00 lbs
SKU 1380
Dust Collection (2) 6'' @ 1962 CFM
: *
: *
: *
Type the characters you see in the picture:
Captcha

*
NT CS24L -1532 Up Cut Saw

NT CS24L -1532 Up Cut Saw

Call for Price and Availability

 
NT ES1648D-1032 Edge Sander

NT ES1648D-1032 Edge Sander

Call for Price and Availability

 
NT PSW-1625 Stretch Wrap Machine

NT PSW-1625 Stretch Wrap Machine

Call for Price and Availability