NT HBR250-2A Twin Head Precision Horizontal Resaw

NT HBR250-2A Twin Head Precision Horizontal Resaw

NT-HBR250-2A-Twin-Head-Precision-Horizontal-Resaw_1263A.jpg
NT-HBR250-2A-Twin-Head-Precision-Horizontal-Resaw_1263A.jpg
NT-HBR250-2A-Twin-Head-Precision-Horizontal-Resaw_1263B.jpg
NT-HBR250-2A-Twin-Head-Precision-Horizontal-Resaw_1263C.jpg
NT-HBR250-2A-Twin-Head-Precision-Horizontal-Resaw_1263D.jpg
NT-HBR250-2A-Twin-Head-Precision-Horizontal-Resaw_1263E.jpg
NT-HBR250-2A-Twin-Head-Precision-Horizontal-Resaw_1263F.jpg
NT-HBR250-2A-Twin-Head-Precision-Horizontal-Resaw_1263G.jpg
NT-HBR250-2A-Twin-Head-Precision-Horizontal-Resaw_1263H.jpg
NT-HBR250-2A-Twin-Head-Precision-Horizontal-Resaw_1263I.jpg
NT-HBR250-2A-Twin-Head-Precision-Horizontal-Resaw_1263J.jpg
NT-HBR250-2A-Twin-Head-Precision-Horizontal-Resaw_1263K.jpg
NT-HBR250-2A-Twin-Head-Precision-Horizontal-Resaw_1263L.jpg
NT-HBR250-2A-Twin-Head-Precision-Horizontal-Resaw_1263M.jpg
NT-HBR250-2A-Twin-Head-Precision-Horizontal-Resaw_1263N.jpg
NT-HBR250-2A-Twin-Head-Precision-Horizontal-Resaw_1263O.jpg
NT-HBR250-2A-Twin-Head-Precision-Horizontal-Resaw_1263P.jpg
NT-HBR250-2A-Twin-Head-Precision-Horizontal-Resaw_1263Q.jpg
NT-HBR250-2A-Twin-Head-Precision-Horizontal-Resaw_1263R.jpg

NT HBR-250A-2 HORIZONTAL RE-SAW BAND SAW

 

• Main Motor: (2) 20HP, 3PH, 460V

• 30 Amp

• Max. Workpiece Size: 11-3/4" (W)" x 8" (H)

• Saw Wheels: 1" x 28"

• Saw Blade Size: 1" x 168" Carbide Tipped Blade

• Distance from upper blade to conveyor table: .35” - 6.7” (9mm - 170mm)

• Distance from lower blade to conveyor table: 3/16” - 4” (4.5mm - 125mm)

• Distance between two blades: Minimum 3/16” (4.5mm)

• Saw wheel width: Accepts 1” or 1 ¼” blades

• Conveyor belt size: 11.8” W x 215 ¾” L (300mm x 5480mm)

• Min. cutting Thickness: 0.35"

• 3HP Inverter Controlled Variable Hydraulic Feed of 5-80 FPM

• Controlling Blade Tension: Hydraulic Tensioning System

• Elevation: (2) 1/4 HP motors with 525 digital set position controls

• Dust Ports: (4) 4" ports requiring 436 CFM at each point of extraction

• Machine Dimensions: 109"(L) x 82"(W) x 85"(H)

• .Machine Weight: 3,080 lbs.

• Packing Dimensions: 115" x 85" x 79"

• Packing Weight: 3,400 lbs.

• (1) Tool box

• Warranty is one year parts

• All machines are tested stateside prior to shipment providing trouble free start up.



  • Top Head Hp. = 20 Hp.
  • Bottom Head Hp. = 20 Hp.
  • Voltage/ Freq. = 460 Volt 60Hz
  • Phase = 3 Phase
  • Amp Requirement = 29 Amps
  • Feed Hp. = 3 Hp.
  • Feed System = 11'' x 218'' Hydraulic Drive Belt
  • Drive System = 3 Hp. Hydraulic Pump
  • Feed Speed = 15 - 80 FPM
  • Variable Speed = Hydraulic Adjustment Knob
  • Elevation Hp. = 1/4 Hp.
  • Elevation Style = (2) CH-525 Elevation Control
  • Elevation Sys. = (4) Post Jack Screw
  • Total Hp. = 43.5 Hp.
  • Electronics = CE Approved Components
  • Control Voltage = 230 Volt
  • Assisted Start = Y Delta
  • Programmable = Elevation
  • Operator Panel = Fixed
  • Throat Capacity = 11-3/4'' x 8''
  • Min. Length = 18''
  • Max. Length = Infinite
  • Min. Width = 1"
  • Max. Width = 11-3/4''
  • Min. Thickness = 3/16"
  • Max. Thickness = 8''
  • Blade Size = 1'' x 168''
  • Tooth Spacing = 5/8 In.
  • Blade Kerf = .063 In.
  • Blade Speed = 6300 RPM
  • Tracking Style = Manual Adjustment
  • Tension Style = Hydraulic Tension
  • Dust Collection = (4) 4'' @ 450 CFM
  • Dust Port Out = (4) 4'' Ports
  • Arbor Diameter = 2" Arbor
  • Digital Display = Elevation
  • Conveyor = 15-1/4'' x 215-3/8''
  • Hold Down Style = Pneumatic / Gravity
  • FLR Included = Filter, Lubricator, Regulater
  • Recommended CFM = 1744 Total CFM
  • Emergency Stop = Push Button
  • Rear E Stop = Push Button
  • Guarding = Full Cabinet Enclosure
  • Oiler = Blade Oil Mister
  • Fence Type = Steel
  • Fence Dims. = 6-1/2'' Tall
  • Blade Guide = Steel Blade Guides
  • Wheel Dims. = 1'' x 28''
  • Wheel Cnstr. = Steel Construction
  • Frame Const. = 3/16'' Steel Construction
  • Table Const. = Steel
  • Infeed Table = 11-1/4'' x 109''
  • Decible Rating = 79 dB
  • Net Weight = 3080 Lbs.
  • Gross Weight = 3400 Lbs
  • Machine Dims. = 109'' x 82'' x 85''
  • Packaging Dims = 115'' x 85'' x 79''


Item ID: 1263

Category: Horizontal Band Saws

Our Price: Call for Price and Availability
 

Weight 3400.00 lbs
SKU 1263
Dust Collection (4) 4'' @ 450 CFM
: *
: *
: *
Type the characters you see in the picture:
Captcha

*
NT CS36R-2532 Timber Up Cut Saw

NT CS36R-2532 Timber Up Cut Saw

Call for Price and Availability

 
NT 12-1100RC

NT 12-1100RC

Call for Price and Availability

 
NT DC20-1-212

NT DC20-1-212

Call for Price and Availability