NT CS24R -1534 Up Cut Saw

NT CS24R -1534 Up Cut Saw

NT-CS24R--1534-Up-Cut-Saw_1085A.jpg
NT-CS24R--1534-Up-Cut-Saw_1085A.jpg
NT-CS24R--1534-Up-Cut-Saw_1085B.jpg
NT-CS24R--1534-Up-Cut-Saw_1085C.jpg
NT-CS24R--1534-Up-Cut-Saw_1085D.jpg
NT-CS24R--1534-Up-Cut-Saw_1085E.jpg
NT-CS24R--1534-Up-Cut-Saw_1085F.jpg
NT-CS24R--1534-Up-Cut-Saw_1085G.jpg
NT-CS24R--1534-Up-Cut-Saw_1085H.jpg
NT-CS24R--1534-Up-Cut-Saw_1085I.jpg
NT-CS24R--1534-Up-Cut-Saw_1085J.jpg
NT-CS24R--1534-Up-Cut-Saw_1085K.jpg
NT-CS24R--1534-Up-Cut-Saw_1085L.jpg
NT-CS24R--1534-Up-Cut-Saw_1085M.jpg
NT-CS24R--1534-Up-Cut-Saw_1085N.jpg
NT-CS24R--1534-Up-Cut-Saw_1085O.jpg
NT-CS24R--1534-Up-Cut-Saw_1085P.jpg
NT-CS24R--1534-Up-Cut-Saw_1085Q.jpg
NT-CS24R--1534-Up-Cut-Saw_1085R.jpg
NT-CS24R--1534-Up-Cut-Saw_1085S.jpg
NT CS24R-1534 Up Cut Saw
 
NT CS24R-1534 Up Cut Saw:  24” pneumatic up-cut saw, 15HP, 3PH, 460V,
 
DETAILS
 
  • Capacity of 1” x 22”, 4” x 19”, 6” x 15”,8" x 6-3/4" max thickness 8-1/2”
  • 26 cycles per minute @ full stroke
  • Y Delta soft start controls
  • Limit switch on front of the control panel which allows partial cycling of the blade on smaller material (simply adjust switch up or down for various material sizes). * Improves saw speed and cut quality,
  • UL / CE approved
  • Safety  guards.
  • Filter and regulator are standard features.
  • Includes one  24" X 100 Tooth carbide blade.
 
 
•   8’ infeed /  8’ outfeed roller system with (2) gravity flip stops . . .
•  16' infeed / 16' outfeed roller system with (2) gravity flip stops . . .
•  24” x 120T carbide tipped blade (standard with saw) . . .
•  24” x 160T carbide tipped blade . . .
•  Gravity flip stop . . .
•  Gang stop with 14" wide static fence . . .  
•  Safety interlock for blade access            . . .
•  460V electrics . . .
•  Double palm button actuation in lieu of foot pedal . . .  
 
FOB Borden, IN


  • Main Motor Hp. = 15 Hp.
  • Voltage/ Freq. = 460 Volt 60Hz
  • Phase = 3 Phase
  • Amp Requirement = 16 Amps
  • Electronics = CE Approved Components
  • Dual Voltage = 230/460 Volt
  • Control Voltage = 24 Volt Magnetic Controls
  • Assisted Start = Y Delta
  • Cut Envelope = 1'' x 22'', 2'' x 21'', 6'' x
  • Max. Width = 1'' x 22''
  • Max. Thickness = 8-1/2''
  • Arbor Rpm = 2100
  • Blade Size = 18'' Tungeston Carbide Tipped
  • No. of Teeth = 100 Tooth
  • Tooth Spacing = 5/8 In.
  • Blade Kerf = .156 In.
  • Dust Collection = (2) 4'' @ 450 CFM
  • Dust Port Out = 4'' Top 4'' Bottom
  • Arbor Diameter = 1'' Arbor
  • Cycles/Minute = 26 Cuts Per Minute
  • Hold Down Style = T Clamp
  • FLR Included = Filter, Lubricator, Regulater
  • Recommended CFM = 480 nl/min
  • Emergency Stop = Push Button
  • Safety Feature = Safety Interlock Switch
  • Guarding = Full Gaurd with Clear View Win
  • Operation Style = Pneumatic Foot Pedal
  • Fence Type = Adjustable Fence
  • Fence Dims. = 2" x 25'' Machined Steel
  • Adjust. Stroke = 7-3/4'' Adj. on Arbor Stroke
  • Frame Const. = 1/4'' Steel Construction
  • Worktable Dims. = 28-3/4'' x 45''
  • Table Const. = Machined Steel
  • Decible Rating = 68 dB
  • Net Weight = 1285 Lbs.
  • Gross Weight = 1455 Lbs.
  • Machine Dims. = 31-3/4'' x 45'' x 56''
  • Packaging Dims = 36'' x 51'' x 61''


Item ID: 1085

Category: Up Cut Saws

Our Price: Call for Price and Availability
 

Weight 1455.00 lbs
SKU 1085
Dust Collection (2) 4'' @ 450 CFM
: *
: *
: *
Type the characters you see in the picture:
Captcha

*
NT CS18L-1034 Up Cut Saw

NT CS18L-1034 Up Cut Saw

Call for Price and Availability

 
NT CS14L-732 Up Cut Saw

NT CS14L-732 Up Cut Saw

Call for Price and Availability

 
NT 555-5 Overarm Pin Router

NT 555-5 Overarm Pin Router

Call for Price and Availability