NT 24-15HCVSXL-1534 Single Surface Planer

NT 24-15HCVSXL-1534 Single Surface Planer

NT-24-15HCVSXL-1534-Single-Surface-Planer_1095A.jpg
NT-24-15HCVSXL-1534-Single-Surface-Planer_1095A.jpg
NT-24-15HCVSXL-1534-Single-Surface-Planer_1095B.jpg
NT-24-15HCVSXL-1534-Single-Surface-Planer_1095C.jpg
NT-24-15HCVSXL-1534-Single-Surface-Planer_1095D.jpg
NT-24-15HCVSXL-1534-Single-Surface-Planer_1095E.jpg
NT-24-15HCVSXL-1534-Single-Surface-Planer_1095F.jpg
NT-24-15HCVSXL-1534-Single-Surface-Planer_1095G.jpg
NT-24-15HCVSXL-1534-Single-Surface-Planer_1095H.jpg
NT-24-15HCVSXL-1534-Single-Surface-Planer_1095I.jpg
NT-24-15HCVSXL-1534-Single-Surface-Planer_1095J.jpg
NT-24-15HCVSXL-1534-Single-Surface-Planer_1095K.jpg
NT-24-15HCVSXL-1534-Single-Surface-Planer_1095L.jpg
NT-24-15HCVSXL-1534-Single-Surface-Planer_1095M.jpg
NT-24-15HCVSXL-1534-Single-Surface-Planer_1095N.jpg
NT-24-15HCVSXL-1534-Single-Surface-Planer_1095O.jpg
NT-24-15HCVSXL-1534-Single-Surface-Planer_1095P.jpg
NT 24-15HCVSXL-1534 Single Surface Planer
 
FEED SYSTEM
 
•  Cutterhead motor:  15HP, 3PH 460V
•  Power table motor: 1HP
•  Feed drive motor:  1HP
 
 
PRODUCT DIMENSIONS
 
•  Stocking thickness range:  1.8" - 7.874"
•  Max depth of cut:  5mm (3/16")
•  Max. width of stock:  610mm (24")
•  Cutterhead diameter:  80mm (3-1/4")
 
 
FEATURES
 
•  24" Helical Head with (6) rows of 15 x 15 x 2.5mm 4-way carbide inserts.
•  Spiral cutterhead provides high chip removal rate, superior surface finish at low noise levels.
•  Range of feed speed:  0-75 ft./min. variable inverter.
•  Quick adjust bed rollers
•  Powered table elevation for fast and convenient thickness setting via the digital control.
•  Extra heavy rib reinforced cast iron table with precision ground surface.
•  Corrugated sectional infeed roller has independent sections for running strip stock of varying thickness.
•  Table area:  25" x 27-1/4" (635 x 692mm)
•  Net weight 1,525 lbs. •  Gross weight 1,630 lbs.
•  Packing dimensions:  (L) 49" x (W) 36" x (H) 54"
•  (1) Tool box
•  Warranty is one year parts
•  All machines are tested stateside prior to shipment providing trouble free start up.


  • Top Head Hp. = 15 Hp.
  • Voltage/ Freq. = 460 Volt 60Hz
  • Phase = 3 Phase
  • Amp Requirement = 19.3 Amps
  • Feed Hp. = 1 Hp.
  • Feed System = Segmented Roller / Power Rolle
  • Drive System = Belt
  • Feed Speed = 5 - 70 FPM
  • Variable Speed = Inverter Controlled
  • Elevation Hp. = 1 Hp.
  • Elevation Style = REC 727M Digital Elevation Con
  • Elevation Sys. = (2) Post Jack Screw
  • Total Hp. = 17 Hp.
  • Electronics = CE Approved Components
  • Dual Voltage = 230/460 Volt
  • Control Voltage = 110 Volt
  • Programmable = REC 727M Elevation Control
  • Min. Length = 10''
  • Min. Width = 1"
  • Max. Width = 24''
  • Min. Thickness = 3/16"
  • Max. Thickness = 7-3/4''
  • Cutter Head RPM = 5250 Rpm
  • Tooling = 15 x 15 x 2.5 SE
  • Head Type = Dynamically Balanced Helical Head
  • Cutter Head Dim = 3-3/4'' x 24''
  • Cut Head Matl. = Alloy Steel
  • Rows of Cutters = 6 Rows
  • No. of Inserts = 144 Inserts
  • Insert Size = 15 x 15 x 2.5 Straight Edge
  • Dust Collection = 981 CFM @ Extraction Point
  • Dust Port Out = 6'' Top
  • Digital Display = Elevation and Feed Speed
  • Powered Rollers = 2 Top Powered Rollers
  • Idle Rollers = 2 Idle Bed Rollers
  • Pressure Shoes = 24'' Spring Loaded Pressure Pl
  • Frame Const. = 1/4'' Steel/Cast Iron Construc
  • Decible Rating = 77dB
  • Net Weight = 1525 Lbs.
  • Gross Weight = 1630 Lbs.
  • Machine Dims. = 43'' x 45'' x 55''
  • Packaging Dims = 36'' x 49'' x 54''


Item ID: 1095

Category: Single Surface Planers

Our Price: Call for Price and Availability
 

Weight 1630.00 lbs
SKU 1095
Dust Collection 981 CFM @ Extraction Point
: *
: *
: *
Type the characters you see in the picture:
Captcha

*
NT CS14L-732 Up Cut Saw

NT CS14L-732 Up Cut Saw

Call for Price and Availability

 
NT 2ST-10XL-1032 Dust Collector

NT 2ST-10XL-1032 Dust Collector

Call for Price and Availability

 
NT 555-5 Overarm Pin Router

NT 555-5 Overarm Pin Router

Call for Price and Availability